Table of Contents
Advertisement
21 A/D Adjust RGB
22 Default PhotoView JPEG Status of Default picture for Photo Frame
23 CI+ Serial Number
24 CI+ HOST ID
Setting Hotel Mode
Hotel Mode allows the customized settings for following hotel options according to various
hotel requirements.
Enable/Disable all Front Panel keys.
Enable all Front Panel keys except for Input Selection key.
Enable/Disable the remote control.
Disable access to all Setup menu items except for Language Setting.
Disable access to the Setup menu (grayed out).
Limit the maximum Volume level.
Force POS/VIDEO Channel/Input, when the TV is turned on.
Force volume setting, when the TV is turned on.
Force picture setting when the TV is turned on.
Force the TV on while main power (AC power) is ON.
There are three ways to set up Hotel Mode Options: via Service Mode, Hotel Mode Settings
menu, and Hotel Clone menu.
Setting Hotel Mode via Service Mode
Enter Service Mode and select Hotel Mode menu by pressing P
After selecting Hotel Mode, press
To select menu, press P
or P
table data.
To move the cursor in the adjustment, press
1. By pressing P
or P , following table data setting will change the value either 1 or 0
on selected items as follows;
OPT2
OPT2
FUNCTION DESCRIPTION
D7 (bit7)
Enable mode that TV standby will be
appeared in forced when turning the main
OK : A/D adjustment set correctly.
NG : A/D adjustment set incorrect.
–
: A/D adjustment is not needed because the picture
format is not used.
A/D adjustment status of RGB (SCART or PC) input.
Same as above
xxx.jpg : default picture is loaded
NG
: default picture is not loaded
Serial Number of CI+ data
HOST ID of CI+
+ to enter details setting in Hotel Mode.
and press OK to enter the adjustment menu of following
+ or
-.
Enable
(This function is ignored
or P .
0
1
(Normal)
Disable
Advertisement
Table of Contents
