Table of Contents
Advertisement
16
j. Volume Control
The MKB-200 can transmit the Main Volume mes-
sages. Use the Volume Knob @.
For Upper Channel
ae liis
For Lower Channel
* The MKB-200's
memory
can
retain the Main
Volume
messages.
When, however, the Slide
Volume
is used for other function than the
volume
contro!
{refer to
"OTHER
USEFUL
FUNCTIONS"), the level set before the Slide
Volume
is turned to other function will be
memorized, therefore cannot be changed any
longer. So, it may be a good idea to write the
setting of the Main Volume to the Memory
Cartridge before changing the function of the
Slide Volume.
k. Tune Request
Tune Request message from the MKB works only
on the synthesizer featuring the Auto Tune func-
tion. To send the Tune Request message, set the
memory
Protect Switch to the ON
position and
press the Write Button.
(When the Memory Cartridge is not used, simply
push the Write Button.)
[4] PATCH CHANGE
1. Outline
By using the Memory Cartridge, the MKB-200 can
retain up to 128 different patch change programs.
Any of these programs can be easily called and
even modified during live performance.
Each Patch Change Program consists of:
. Main Volume (for L and U)
. Key Mode (DUAL, SPLIT, WHOLE U, L)
. Split Point
. Program Change (for L and U)
MIDI Channel (for L and U)
. Dynamics
. After Touch (On/Off)
. Key Transpose
ONOAORWN->
* Please note that the MKB-200
has no
memory
capacity for patch change
pro-
grams without the supplied Memory Car-
tridge (M-16C) connected.
CARTRIDGE
Protect Switch
ON
* Please be sure to set the Protect Switch to the
ON
position except for rewriting the patch
programs.
Advertisement
Table of Contents
