©
Connecting Speaker Systems
Monitor TV or an
amplifier for center
, to the second
' speaker system
L._| [OOOO
sods
Set the FRONT SPEAKER IMPEDANCE SELECTOR
according to the impedance of the used speakers, using a
screwdriver.
CAUTION
When you operate two speaker. systems
simultaneously, be sure to use the
speakers with the impedance of more
than 8 ohms and set the FRONT SPEAKER
IMPEDANCE SELECTOR to 4-69.
Note
Once the speakers have been connected, move SPEAKERS
selector (on the front panel) to A, B or A + B setting.
When using the headphones, set the SPEAKERS selector to OFF.
Lente
speaker
speaker
Speaker impedance and power capability (FRONT SPEAKER A
or B)
This receiver is designed to work best with speakers having
nominal impedance from 4 to 16 ohms at rated 80 watts (STR-
GXS9ES) or 100 watts (STR-GX69ES) RMS per channel! with an 8
ohms load from 20 — 20,000 Hz.