Table of Contents
Advertisement
DESIGN
MODE
1. ENTERING TO DESIGN MODE
1) Select the Service mode.
2) While pressing CALL button on Remote
3) Press MENU button on TV.
and press MENU button on TV.
s
Press
~<— ITEM
——____»
~<— DATA
Press
(Design mode)
(Adjustment mode)
When QA02 is initialized, items "OPTO" and "OPT1" of DESIGN MODE are set to the data of the representative model of this
chassis family.
Therefore, because ON-SCREEN
specification remains in the state of the representative of model. This model is required to
reset the data of items "OPTO" and "OPT1".
2. SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL YW button in the design mode changes the adjustment items in the order of table-3.
3. ADJUSTING THE DATA
Pressing of VOLUME 4A or ¥ button will change the value of data.
Advertisement
Table of Contents
