Husqvarna Power Axe 350i Operator's Manual page 18

5. Push and hold the start/stop button until the green
LEDs come on, and the Boost function is started.
To use the Boost function
The Boost function increases the chain speed and the
power of the product.
1. Push the Boost button. The right green LED goes
off, and the Boost function is stopped.
2. Push the Boost button again to start the Boost
function.
To stop the product
1. Push the start/stop button until the green LED light
goes off.
18
2. Push the battery release buttons and remove the
battery from the battery holder to prevent accidental
start.
Pull stroke and push stroke
You can cut through wood with the product in 2 different
positions.
• To cut on the pull stroke is when you cut with the
bottom of the guide bar. The saw chain pulls through
the tree when you cut. In this position you have
better control of the product and the position of the
kickback zone.
• To cut on the push stroke is when you cut with the
top of the guide bar. The saw chain pushes the
product in the direction of the operator.
WARNING:
caught in the trunk, the product can be
pushed at you. Hold the product tightly
If the saw chain is
1844 - 006 - 13.07.2023