Bluetooth Wireless Technology - Philips Respironics DreamStation CPAP User Manual

Bluetooth Wireless Technology
Your device has Bluetooth wireless technology. which is one method by which you can transfer your therapy device's
data to DreamMapper. DreamMapper is a mobile and web-based system designed to help Obstructive Sleep Apnea
(OSA) patients enhance their sleep therapy experience.
Pairing your therapy device to your Bluetooth enabled Mobile Device
Note: You can only pair your therapy device to one mobile device at any given time.
Note: Pairing works best when your therapy device and mobile device are in the same room.
Note: The current version of DreamMapper will guide you through these instructions.
Note: After initiating pairing, you will have 30 seconds to complete the setup. After this time, it will be
cancelled automatically.
Follow the steps below to manually pair to your mobile phone or tablet.
1. With your therapy device powered up and the blower off, initiate Bluetooth Setup from the DreamMapper mobile
app.
2. If you need to select from a list of available Bluetooth devices, the therapy device will appear as "PR BT XXXX"
(XXXX will be the last four digits of the serial number listed on your therapy device).
You will be required to con昀椀rm pairing via one of these two methods:
3.
• Your mobile device may ask you to enter a PIN code
The following icon will appear on your therapy device screen with "Pair?":
Rotate the therapy device's Control Dial to select "yes," and press the Control Dial. Your therapy device will display
a 6 digit PIN. Enter this PIN on your mobile device to complete pairing.
Your mobile device may ask you to con昀椀rm a PIN code
•
The following icon will appear on your therapy device screen with a 6 digit PIN and "Pair?":
Verify that the PIN is the same on both the therapy device and the mobile device. If so, rotate the therapy device's
Control Dial to select "yes" and press the Control Dial. Then, accept on the mobile device to complete pairing.
User Manual
15