Bluetooth Wireless Technology - Philips DreamStation CPAP User Manual

Bluetooth Wireless Technology

Your device has Bluetooth wireless technology. You can pair the therapy device to a mobile device that has the
DreamMapper app installed. DreamMapper is a mobile and web-based system designed to help Obstructive Sleep
Apnea (OSA) patients enhance their sleep therapy experience.
Pairing to your Bluetooth enabled Mobile Device
Note: You can only pair your therapy device to one mobile device at any given time.
Note: Pairing works best when your therapy device and mobile device are in the same room.
Follow the steps below to manually pair to your mobile phone or tablet.
1. To pair to your mobile device, first ensure that the Bluetooth setting is turned ON on your mobile device. Refer to
your mobile device's instruction manual for more information.
2. If you need to select from a list of available Bluetooth devices, the therapy device will appear as "PR BT XXXX"
(XXXX will be the last four digits of the serial number listed on your therapy device).
3. When your therapy device is powered up but the blower is off, initiate pairing from your mobile device.
4. If your mobile device is in range, one of the following two steps will apply:
• Your mobile device has Bluetooth Secure Simple Pairing (SSP)
The following icon will pop-up on your therapy device screen with a 6 digit number and "Pair?":
This number is a six digit passkey generated during SSP. Verify that the six digit SSP passkey is the same on both
the mobile device and therapy device. Rotate the Control Dial between "yes" or "no", and then press the Control
Dial to choose. If "no" is selected, or the pop-up screen times out after 30 seconds, the device will reject the pair
request. If "yes" is selected, the therapy device will acknowledge the six digit SSP passkey. If the mobile device also
acknowledges the request, the two will now be paired and ready to connect using DreamMapper.
• Your Bluetooth enabled mobile device does not support Bluetooth SSP
Your mobile device will prompt you to enter a pin code. Enter "1008" on your mobile device. The following icon
will pop-up on your therapy device screen with the number "001008" and "Pair?":
Rotate the Control Dial between "yes" or "no", and then press the Control Dial to choose. If "no" is selected,
or the pop-up screen times out after 30 seconds, the device will reject the pair request. If "yes" is selected, the
therapy device will acknowledge the 001008 passkey. If the mobile device also acknowledges the request, the two
will now be paired and ready to connect using DreamMapper.
Note: Do NOT select "yes" on the pop-up screen unless you are currently trying to pair your devices. This will
ensure that only your mobile device connects to your therapy device.
14 User Manual