HCD-DZ555K/DZ556KB/DZ750K
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Schematic Diagrams.
Note:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and
specified.
•
f
: internal component.
• C : panel designation.
• A : B+ Line.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
• Voltages are dc with respect to ground in service mode.
Voltage variations may be noted due to normal production
tolerances.
no mark : DVD STOP
• Voltages are taken with VOM (Input impedance 10 MΩ).
• Signal path.
L
: VIDEO
f
: AUDIO IN
• Abbreviation
AUS
: Australian model
E3
: 220 – 240V AC area in E model
E12
: 220 – 240V AC area in E model
KR
: Korean model
SP
: Singapore model
2
DIAGRAMS
1
/
W or less unless otherwise
4
For Printed Wiring Boards.
Note:
• X : parts extracted from the component side.
•
a
: Through hole.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Parts face side:
Parts on the parts face side seen from
(SIDE A)
the parts face are indicated.
Pattern face side: Parts on the pattern face side seen from
(SIDE B)
the pattern face are indicated.
• Indication of transistor.
B
C E
These are omitted
C
Q
These are omitted.
B
E