Page 1: Table Of Contents
Checking the water inlet hose Precautions and tips, 7 General safety Load balancing system Disposal Description of the washing machine BWD 71252 and starting a wash cycle, 8-9 Control panel Indicator lights Starting a wash cycle Wash cycles, 10 Push & Wash...
Page 2: Installation
Installation ! This instruction manual should be kept in a Levelling the machine correctly will provide safe place for future reference. If the washing it with stability, help to avoid vibrations and machine is sold, transferred or moved, make excessive noise and prevent it from shifting sure that the instruction manual remains with while it is operating.
Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washing a wall drain situated machine’s plug.
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
Page 5: Technical Data
Technical data Model BWD 71252 width 59.5 cm Dimensions height 85 cm depth 54 cm Capacity from 1 to 7 kg Electrical please refer to the technical connections data plate fixed to the machine maximum pressure 1 MPa (10 bar)
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and electricity Cleaning the pump supplies The washing machine is fitted with a self- • Turn off the water tap after every wash cycle. cleaning pump which does not require any This will limit wear on the hydraulic system inside maintenance.
Page 7: Precautions And Tips
Precautions and tips Disposal This washing machine was designed and constructed in accordance with international safety regulations. The fol- • Disposing of the packaging materials: observe local lowing information is provided for safety reasons and must regulations so that the packaging may be re-used. therefore be read carefully.
Page 8: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel FUNCTION DOOR DELAY TIMER buttons with indicator lights LOCKED button indicator light START/PAUSE ON/OFF DISPLAY button with indicator button light CHILD LOCK WASH CYCLE button with Detergent dispenser drawer knob indicator light TEMPERATURE...
Page 9: Indicator Lights
Indicator lights The indicator lights provide important information. This is what they can tell you: Function buttons and corresponding indicator lights When a function is selected, the corresponding indicator light will illuminate. If the selected function is not compatible with the program- med wash cycle, the corresponding indicator light will flash and the function will not be activated.
Page 10: Wash Cycles
Wash cycles Push & Wash This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the Push &...
Page 11: Personalisation
Personalisation Setting the temperature Turning the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash N.B.: If the set value is compatible with the selected cycle, the knob indicator will be lit (fixed light). If it isn’t, it will flash and 3 beeps will be heard.
Page 12: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Delicates: use programme 4 to wash very delicate garments. It is advisable to turn the garments inside out Successful washing results also depend on the correct dose before washing them. For best results, use liquid detergent of detergent: adding too much detergent will not necessarily on delicate garments.
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •...
Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
Page 15: Product Guarantee And Repair Information
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Indesit’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Indesit reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage.
Page 16 195156062.00 03/2017 Whirlpool EMEA S.p.a. Via Carlo Pisacane n. 1 20016 Pero (MI) Italy www.indesit.co.uk...

Indesit BWD 71252 Instructions For Use Manual

Quick Links

Related Manuals for Indesit BWD 71252

Summary of Contents for Indesit BWD 71252

Table of Contents