BMW 2 GRAN COUPE 2021 Series Owner's Manual page 229

▷ Air recirculation mode.
▷ Upper side of the air flow, manual button.
▷ Air distribution, manual.
▷ Defrosting the windshield
Turning off
Complete system:
Press the button.
Temperature
Principle
The automatic climate control cools or heats to
the configured temperature and then keeps the
temperature constant.
Setting the temperature
Using the button:
Press the upper or lower button side to
set the desired temperature.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver" or "Front passenger"
6. "Temperature:"
7. Set the desired temperature.
8. "OK"
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Online Edition for Part no. 01405A37F24 - VI/21
Climate control
Air conditioning
Principle
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
Functional requirement
The car's interior can only be cooled with the
drive-ready state switched on.
Switch climate control function
on/off
Using the button:
Press the button.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "A/C"
Depending on the weather, the windshield and
the side windows may fog up briefly when drive-
ready state is switched on.
Air conditioning is switched on automatically with
the AUTO program.
When using the cooling mode, condensation that
will exit below the vehicle.
Maximum cooling
Principle
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.
Functional requirement
The function is available at an outside tempera‐
ture above approx. 32 ℉/0 ℃ and with the drive-
ready state switched on.
CONTROLS
229