Handle Installation - American Standard Aspirations TU06150 Series Manual

5

HANDLE INSTALLATION

• Hold ADAPTER (4) onto CARTRIDGE STEM
(2) and install ADAPTER SCREW (5) through
ADAPTER (4) into CARTRIDGE STEM (2).
Tighten ADAPTER SCREW (5) to secure
ADAPTER (4) to CARTRIDGE STEM (2).
• Install HANDLE (1) by pushing it onto
CARTRIDGE STEM (2) and tightening SET
SCREW (3) from below with 2.5 mm Hex
Wrench supplied.
B
6
ADJUST HOT LIMIT STOP
• By restricting HANDLE rotation and limiting the
amount of hot water allowed to mix with the cold,
the HOT LIMIT SAFETY STOP (1) reduces risk of
accidental scalding. To set the maximum hot water
temperature of your faucet valve, adjust the setting
on the HOT LIMIT SAFETY STOP (1).
• Turn CARTRIDGE STEM (2) to the OFF position
(coldest setting) before making adjustment to
HOT LIMIT STOP (1). Pull forward and rotate
counterclockwise one number to limit hot water
temperature. Use NUMBERS (5) on CARTRIDGE
(4) on HOT LIMIT STOP (1) for indication.
2
4
5
1
4
1
COLDER
(Larger Numbers)
1 2 3 4 5 6 7 8 9 10
3
2.5MM HEX
WRENCH
5
2
HOTTER
(Smaller Numbers)
1 2 3 4 5 6 7 8 9 10
3