Table of Contents
Advertisement
OPTIONS2
RGB SELECT
HD SELECT
PICTURE SIZE
J SELECT
M SELECT
MENU RETURN
SET -UP
LANGUAGE •
ENGLISH •
PRESS OK TO CONFIRM
FREQUENCY
H. FREQUENCY • 43.3 KHZ
V. FREQUENCY • 85.0 KHZ
H. POLARITY • NEGATIVE
V. POLARITY • NEGATIVE
MODE • 9
RESOLUTION • 640 X 480
J SELECT
M SELECT
MENU RETURN
Use of the menus and the menu system
10
Options 2 menu
Setting a computer image to the correct RGB select screen
This control allows you to select the most appropriate RGB Select mode for
a moving image, such as video mode, wide mode or a digital broadcast.
&
Select
with the cursor up/down.
RGB SELECT
é
Press the cursor left/right to select one of the modes in order to display
the following signals correctly:
: automatically selects the suitable mode for the specifications of input
AUTO
signals as listed in the table "Computer input signals supported by this
system", see p. 11.
: to display VESA standard signals. Use this mode for a still image from a
STILL
computer.
: the video signal will be converted to RGB signals to make the
MOTION
picture more easily viewable. Use this mode for a motion image from a
computer.
: when a 852 dot x 480 line signal with a horizontal frequency of
WIDE 1
31.7 kHz is input, the image may be compressed horizontally.To prevent this,
select
.
WIDE 1
: when a 848 dot x 480 line signal with a horizontal frequency of
WIDE 2
31.0 kHz is input, the image may be compressed horizontally.
To prevent this, select
: select this mode when watching digital broadcasting (480p).
DTV
Setting high definition images to the suitable screen size
This control allows you to set whether the number of vertical lines of the
input high definition image is 1035 or 1080.
&
Select
.
HD SELECT
é
Press the cursor left/right to select the correct HD mode:
- 1080A for special digital broadcasts (e.g. DTC 100)
- 1080B for standard digital broadcasts
- 1035I for Japanese "High Vision" signal format.
Setting the picture size for RGB input signals
This control allows you to select the picture size mode for RGB input signals
or
.
ON
OFF
and
ON: NORMAL
FULL
:
and
OFF
TRUE
FULL
Note: Select
in the
RESET
to the predefined factory values and settings.
Set-up menu
Setting the menu language
&
Use the cursor down to select
é
Use the cursor left/right to select one of the languages which will be used
to display the menus.
"
Press the
key to confirm.
OK
Frequency menu
This control allows you to check the frequencies the polarities and the
resolution of the signals currently being input from a computer.
The menu items cannot be selected nor controlled and are displayed in
English only.
.
WIDE 2
can be selected for widescreen switching
can be selected for widescreen switching.
menu to reset all the
OPTIONS 1
.
LANGUAGE
and
settings
OPTIONS 1
2
Advertisement
Table of Contents
