Table of Contents
Advertisement
Unpacking and wall mounting instructions
Special technology is required in the mounting of the plasma display.
Such work should never be undertaken by the customer.
For the safety of the customer, we ask that the installation work be started after careful attention is paid to the strength of the
mounting location to be sure it will withstand the weight (about 46 kg) of the plasma display and mounting hardware.
Be sure that two or more persons engage in the installation work.
Be careful not to lose any of the removed screws or other parts.
Remove the packaging
&
Open the upper carton which packages the plasma display
and remove the styrofoam.
é
Remove the upper carton and open the protective sheet.
Package parts list
wall mount unit
display fittings
Unpacking and wall mounting instructions
2
Protective sheet
M4 screws x 4
M4 screws x 8
Attach the display fittings
"
With the display standing in its packaging carton, align the
round holes of the display fittings with the screw holes of
the plasma display, then fasten the display fittings using the
supplied screws.
round hole
square hole
Installation of the display fittings can also be performed by
laying down the plasma display on a flat surface.
Remove the plasma display form the carton, place the
protective sheet that was used in the packaging on a flat
surface (which is larger than the display), then lay the
display down on top of this with the screen surface facing
downward.
Advertisement
Table of Contents
