Craftsman CMXEVCVVBVCM12 Instruction Manual page 13

WARNING:
TROUBLESHOOTING.
For assistance with your product, visit our website at www.craftsman.com for a list of service centers,
or call CRAFTSMAN at 1-888-331-4569.
PROBLEM
The wet/dry vacuum will not
operate.
The dust comes out from the
motor cover.
Reduced efficiency and
motor/speed vibration.
TROUBLESHOOTING
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
POSSIBLE CAUSE
No power supply.
Faulty power cord.
Collection tank is full.
Switch in the wrong position.
The cartridge filter is missing
or damaged.
Vacuum has been used to
collect fine dust, such as dry
wall dust, fireplace soot, or
ash, without a fine dust filter.
Incorrect use of foam filter
when dry vacuuming.
There are blockages in the
nozzle, hose, or the collection
tank inlets.
The cartridge filter is clogged
by fine dust.
Float valve has closed.
SOLUTION
Check the power supply, cord,
breakers, and fuses.
Unplug and check the power cord.
If damaged, have it repaired by a
professional.
Empty the collection tank.
Press the ON 'I' button on the power
head.
Attach or replace the cartridge filter.
Remove the standard cartridge filter
and install the appropriate fine dust
filter (available separately).
Replace the foam wet filter with the
cartridge filter.
Unplug and check nozzle, hose and
collection tank inlets for blockages.
Take off the filter and clean it or
install a new cartridge filter.
Empty the collection tank of any
liquid waste and ensure the float
valve located underneath the filter
is able to move freely.
ENGLISH
13