Panasonic CS-1803KE Operating Instructions Manual page 8

Open the door and
press (the Clock)
button.
e After the batteries have been
inserted:
"PM 12:00" will blink in the
display.
When changing the time:
The letters of AM or PM will
blink.
HSITSN
Press the Time button Press (the Clock)
to set the hours and button, and then close
minutes.
the remote control door.
Press the [1 button to ad- The letters or AM or PM wil light
vance the time, and press the up and setting of the current time
button to reverse the time. will be completed.
(The letters of AM or PM will
blink.)
e When the timer is set
The current time display will be vanished.
e About the Remote Control [B<>A] switch
¢ This switch is used when two air conditioner units have
been installed in one room.
When two air conditioner with two remote controlles. are
used in one room. Set one unit and remote controler to
[A] and the other unit & remote controller to [B] to iwoid
mis-transmission of signals.
lf two air conditioners have been installed in one rom,
please consult with your dealer.