Specifications - Pioneer CX-J500 Service Manual

(o> Gre t-1e] 8)
@) Display section
® ©O®©
@® Time/channel indicator
Normally indicates the current time. The current time is shown when
the display is in the frequency mode; the channel number is shown when
the display is in the station mode.
WAKE UP timer indicator
Displays the selected wake up timer.
©) LOCAL indicator
Lights when the LOCAL/DX button () is set to ON.
@) STEREO indicator
Lights when an FM stereo broadcast is received (FM MONO button on
the remote control unit set to OFF).
© TUNED indicator
Lights when a broadcast is received and tuned in well.
©) SLEEP indicator
Indicates that the sleep timer is activated.
@© REC timer indicator
Displays the timers setting condition.
@ MONDO indicator
Lights when the FM MONO button on the remote control unit is set to
ON. When this indicator is lit, FM stereo broadcasts are reproduced
monaurally.
@® Frequency display
Shows received broadcast frequency. Also gives scrolling display of
main function status.
FM and MHz light: FM reception.
AM and kHz fight: MW or LW (except for the multi-voltage model)
reception.
4. SPECIFICATIONS
FM Tuner Section
Frequency range ..........cccceecseseeeeeeeeeeen tees 87.5 MHz to 108 MHz
Usable Sensitivity ...........0....4. Mono: 12.8 dBf, IHF (1.2 nV/75 Q)
Sensitivity (DIN) .............eeeeeteeeeeeees Mono S/N 26 dB: 1 2V/75 2
Stereo S/N 46 dB: 50 »V/75 2
Signal-to-Noise Ratio (IHF, 85 dBf Input) ..............0.. Mono: 77 dB
Signal-to-Noise Ratio (DIN).........cccccececeeseeeeeeeneeeenee Mono: 66 dB
Stereo: 60 dB
Distortion aut. ceeieoncaaed inci eee nine hid tvees Stereo: 0.5% (1 kHz)
Antenna INDUt ........ce cece eeeeee eee eeeenereeseeneuseneeeees 75 Q unbalanced
MW (AM) Tuner Section
Frequency range
SKAZ Step ecciccistces hi tisabedevegectnteaee iat 531 kHz to 1,602 kHz
VOM KAZ Step seccecicrias ss onddvacs it idaovereceetes 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) ...............ceeeeeeeeeeeen teens 350 pV/m
LW (AM) Tuner Section
(For LW-equipped models only)
Frequency range ..........cceseecseseceeseeeeeeneeneees 153 kHz to 281 kHz
Sensitivity (IHF, Loop antenna)...........:c.cecsereeeeneeeeens 1,500 pV/m
10
@) VOL (VOLUME) control
(8) Open the hinged panel door with your finger.
MIC (microphone) jack
This is a standard jack for connecting a microphone.
@) MIC LEVEL control
Used for adjusting the volume of microphone.
@2 REMOTE SENSOR
@ CLOCK ADJ button
Used for starting the clock adjustment.
@ Timer selector buttons
[WAKE-UP 1, 2]
Used for timer playback setting.
[REC]
Used for timer recording setting.
@) SET button
Used for current time, timer playback, and timer recording setting.
(@® LOCAL/DX button (when receiving FM broadcasts)
Use this if the broadcast signal is too strong, causing noise and
distortion. The attenuator reduces the strength of the signal, reducing
noise and distortion.
@ STATION MEMORY button
Used to memorizing stations.
Furnished Parts
FM T-type Antennd.........ccccccccesseeeeee essence ee eenereeereenenenseeneenees 4
AM Loop Antenna
Power Supply/Miscellaneous
Power requirements
UKEMOdel ss sswncesasisdesadtasasvetectesgies a.c. 240 Volts ~ , 50/60 Hz
European model a.c. 220 — 230 Volts~ , 50/60 Hz
Multi-voltage model ........ AC 110 V/120 — 127 V/220 V/240 V
(switchable), 50/60 Hz
Power consumption
U.K. and European models.............:ccceeecesseeeeeesereeeeeeeen es 40 W
Multi-voltage model........ 50 W
AC outlets switched (x 2) . . . . . . . . c ccc eccsceeseesecaereaeenavareeneeee 415 W
Dimensions ...........:ccceeeeeeeeeeee 360 (W) x 345 (D) x 90.5 (H) mm
WEIGH wie cssitcctvrecst reas sain aces rvdcediaecadserededseaseaevecbdaanosaigs 4.5 kg