Kenmore 88522 Installation Instructions Manual page 16

4. Attach the microwave oven to the top cabinet.
Cabinet Front
Cabinet Bottom Shelf
| / Filler Block
ant
Wa
Equivalent to
| Depth of Cabinet
Recess
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
~@—— Self-Aligning Screw
FOR EASIER INSTALLATION AND PERSONAL
S \
IMPORTANT: Do not grip or use handle during Microwave Oven Top
installation.
NOTE: if your wall cabinet is metal, use the nylon 5. Insert 2 self-aligning screws through outer top cabinet
grommet around the power cord hole to prevent holes. Turn two full turns on each screw.
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet has a front overhang.
IMPORTANT: If filler blocks are not used, case
damage may occur from over tightening screws.
NOTE: When mounting the microwave oven,
thread power cord through hole in bottom of
top cabinet. Keep it tight throughout Steps
: = . Cas
:
7. Install grease filters. See the Owner's Manual packed
with the microwave.
2. Rotate front of oven
up against cabinet
bottom.
3. Insert a self-aligning screw through top center cabinet
hole. Temporarily secure the oven by turning the
screw at least two full turns after the threads have
engaged. (It will be completely tightened later.) Be
sure to keep power cord tight. Be careful not to
pinch the cord, especially when mounting flush to
bottom of cabinet.
16