Advertisement
REMOVAL OF PLAYER (TURNTABLE)
_—
(REAR VIEW)
Fig. 1
(BOTTOM VIEW)
Fig. 2
3.
Remove the screws E and F fastening the left side of
Cabinet G. (Fig. 3)
G
(LEFT SIDE VIEW)
Fig. 3
4.
Remove the screw H and I fastening the right side of
Cabinet J.
5.
Lift the front panel side of Cabinet in the direction of
the arrow and pull it backward.
Then, Cabinet Top
will be separated from the Unit. (Fig. 4)
(RIGHT SIDE VIEW)
Fig. 4
ATTENTION:
When
removing the cabinet on the right side, be careful
not to disconnect the lead of the AM Antenna Coil.
C.
REPAIR AND ADJUSTMENT OF PRINTED
CIRCUIT BOARD
1.
The removal of Cabinet
Bottom
Plate K will give an
access
to the repair or adjustment
work
of Main
P.C.Board.
Note: It is not necessary to remove Cabinet.
Advertisement
