Table of Contents
Advertisement
Installation
STEP 2 Flooring
STEP 3 Adjust the leveling legs
CAUTION
• The refrigerator must be leveled on a flat, solid floor. Failing to do so can cause damage
to the refrigerator or physical injury.
• Leveling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
• For safety reasons, adjust the front side a little higher than the rear side.
The refrigerator can be leveled using the front legs that have a special screw (leveler) for
leveling purposes. Use a flat-head screwdriver for leveling.
28
English
Untitled-7 28
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveler of the front left leg. Turn the
leveler clockwise to raise, or turn it
counterclockwise to lower.
2021-11-29
6:09:50
Advertisement
Table of Contents
