Sylvania 6615LDG Owner's Manual page 14

You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.
CAPTION mode: You ctm watch dramas, movies _md
news while captioning the dialogues and the contents
of news.
TEXT mode: You can watch half screen text informa-
tion if you want.
1-2: You may get these captions or text information
by selecting either "1" or "2". "2" is usually used for
a second l_mguage if available.
NOTE
" Not all programs are broadcast with closed cap-
tions. Your unit is designed to provide error-free
closed captious from high quality _mtenna, cable
and VCR signals. Conversely, poor quality sig-
nals are likely to result in caption errors or no
captious at all. Common signal conditions which
may cause caption errors are listed below:
-- Automobile ignition noise
-- Electric motor brash noise
-- Weak snowy reception on TV screen
-- Multiplex signal reception displaying picture
ghosts or airplane flutter
,, If the unit displays a black box on the TV
screen, this metros that the unit is set to the
TEXT mode. To clear screen, select
"CAPTION1",
"CAPTION2" or "OFF".
1
Press [SETUP] then press [A] or [v] to point
to "CAPTION".
SETUP / _ CHAN*,_EL SeT uP
V_GHIp SET UP
C--_ I_ I_ ........ *{E;qc- ,SH]
• CAPTION /OFF/
_ _' BACK L_GHT _B*q_GH]' 1
2
Press [ENTER] repeatedly to select the
desired caption menu "CAPTION1",
"CAPTION2", "TEXT1" or "TEXT2".
TV SET UP
OHANNEL SET UP
V.OHIp SET UP
OAPTION {OAPTtONI ] .......
BACK UGHT [a_tGHr]
" If you select "OFF", Closed Caption System set-
ring is canceled.
3
Press [SETUP] to exit the menu.
,-- NOTE
"Even if there is a power failure of any [
kind, the unit will retain its memory for
J
this feature.
TO SELECT TV SOUND MODE
1
Press [AUDIO] repeatedly to select the MTS
output mode.
• The output mode changes as described below
every time you press [AUDIO].
STEREO _ SAP* ._- MONO
I
* Second Audio Program (SAP):
Sometimes broadcasters add another ch_mnel of
audio to the programs they air. This is usually a
secondary language or perhaps a radio station.
• After 5 seconds, the current audio status will
disappear from the TV screen.
NOTE
• The initial setting is "STEREO". ]
,, This setting is saved even if the unit is turned
J
oft"or the AC cord is unplugged.
TO CHECK THE SOUND STATUS
By pressing [DISPLAY], the status shown below
will appear on the display when you receive a broad-
cast on the unit tuner ch_mnel you are watching.
CH 123
_3)
L _2)
--l)
1) When a program is broadcast in stereo,
"STEREO" appears on the TV screen.
2) When a program is broadcast in second audio,
"SAP" appears on the TV screen.
3) When a program broadcast both in stereo and sec-
ond audio, "STEREO/SAP" appears on the TV
screen.
EN - 14 -