Philips 42PF9731D - 1 Manual page 23

TV menu
TV settings
Ambilight
.............
Settings assistant
Mode
Reset to standard
Colour
Picture
Custom colour
Sound
Separation
Ambilight
Colour boost
Balance
Info
Enjoy Ambilight (Continued)
Custom colour
Note: only available when Custom has been selected in
the Colour menu.
Allows you to customise the ambilight colour.
<
Select Palette to select the general colour of the light
output.
<
Select Saturation to adjust the colourfulness of the light.
Separation
Allows you to define the stereo effect in case, Relaxed,
Moderate or Dynamic has been selected in the Mode menu.
<
Select Off for a mono behaviour which means that all lamps
will behave equally.
<
Select Minimum, Medium or Maximum to define the
Ambilight stereo effect spread over the available lamps.
Colour boost
Note: not available when Colour has been selected in the
Mode menu.
Allows you to amplify the colours of the light for a more
dynamic effect.
<
Select Off, Minimum, Medium or Maximum according
to your personal preference.
Balance
Allows you to adjust the colour and level of light intensity
on the sides of the picture.
Ambilight in standby mode
When the TV is switched off, the ambient lights will also be
switched off.When the TV is in standby mode, ambilight can
be used to provide a unique ambience for the room.
<
Press the Ambilight key on the remote control to switch
between Ambilight On or Off. See Use of the remote
control, p. 6.
<
Press the
Ambilight modes.
Note: when the TV is switched to standby, and you switch
Ambilight On, then less Ambilight modes are available.
Caution: Infrared interference
To avoid bad infrared remote control reception, place your
peripheral equipment out of sight of the ambient lights of
your TV. Ambilight does not function well when the room
temperature is less than 59°F/15°C.
key repeatedly to toggle through the
MODE
EN
23