Dvd Player Or Other Accessory Digital Source Devices - Philips 42PF9730A - 1 Manual

AV1
Pr
H
Pb
V
Y
VIDEO
AV1
S-VIDEO
VIDEO
AV1/AV3 :
L
S-VIDEO
YPbPr
AV2
R
1
DVD / STB
AV1 :
H + V
H Pr
V Pb
Y
VIDEO
AV1
S-VIDEO
AV1 :
VIDEO
YPbPr
L
S-VIDEO
AV2
R
DVD / STB
H Pr
V Pb
VIDEO Y
AV1
S-VIDEO
VIDEO
L
S-VIDEO
AV1/AV2 :
R
AV2
S-VIDEO
AV2
1
DVD / STB
34
L
R
AV1 :
L + R
AV3
DIGITAL
Pr
AUDIO
IN
Pb
3
Y
AV3
L
R
DIGITAL
AUDIO
IN
AV3
AV1 :
Pr
L + R
Pb
Y
L
AV1
R
DIGITAL
AUDIO
IN
AV3
Pr
Pb
AV1/AV2 :
Y
L + R
2

DVD Player or other accessory digital source devices

Devices with Component Video Output Connectors (YPbPr)
This TV is capable of displaying 1080i, 720p and 480p DTV signals when
connected to a DTV tuner Set Top Box. Select the output of the Set Top
Box to either 1080i, 720p or 480p. A DTV signal must be available in your
area.
Connect the three separate component video cables 1 to the device
&
having component video outputs (YPbPr), such as Set Top Boxes, DVD-
players, laser-disc players, videogame players, satellite receivers or other
equipment, and to the Y ,
• Connect to the Y , Pb and
audio signals.
• Connect to the Y , Pb and
audio signals.
In case of a device with digital audio, connect the audio cable 2 to the
é
of the device and to the
DIGITAL AUDIO OUT
or to your Home Cinema system.
In case of a device with analog audio, connect the audio cable to the
device's and
AUDIO L R
Devices with RGB output
&
Connect the device with RGB output with separate Horizontal and Vertical
sync to the Pr / Pb /
R B Y/G
2.
é
Connect the audio cables to the
Devices with an S-Video connector
&
Connect an S-Video cable to the
Note: When using the
S-VIDEO
input that you are using.
VIDEO
é
Connect the audio cables to the device's
and audio or
L R AV1 AV2
connected the S-Video cable.
Notes
- If necessary, you can adjust the picture position to the center of the screen with the
cursor keys.
- The labels for the component video sockets may differ depending on the DVD
player or the device connected. Although the abbreviations may vary, the letters B
and R stand for the blue and red component signals, respectively, and Y indicates
the luminance signal. Refer to the DVD player's or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 720p and
1080i as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
- Due to possible digital image distortion when displaying signals from connected
digital equipment, automatically the Auto picture setting
selected Digital STB in the Source menu. See Picture menu, Auto picture, p. 19.
Changing this setting during reviewing will not be stored as
switch off.
Warning : in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in the
correct way or move your digital device further away from your TV.
Pb and Pr jacks of or
AV1 AV3
Pr jacks of in case of devices with analog
AV1
Pr jacks of in case of devices with digital
AV3
DIG. AUDIO IN
3 jacks and the
and audio jacks of
L R
input 1 jacks and to the
and jacks of
L R AUDIO
or
AV1 AV2 S-VIDEO
connector do not connect any device to the
and
AUDIO L
jacks 2 on the TV accordingly to where you
Soft
Personal
on the TV.
of the TV
.
AV1
and jacks of
H V AV1
3.
AV1
input 1.
AV
jacks and to the
R
is selected, if you
setting after