Table of Contents
Advertisement
Auto Color modes:
•
Personal
: Select any color or hue to match to
your personal taste, e.g. your interior, the
program content (sports, movie, etc.), the mood
you are in, etc.
•
:The color is matched to that of
Warm white
most normal lightbulbs. Select this setting if you
want the Ambilight to fit best with normal living
room lighting.
•
:The color is matched to that of
Cool white
normal daylight (6500K). Select this setting if
you prefer more cool lighting.
Note: the 6500 K is the SMPTE recommended
setting for ambient backlighting of displays.
•
:The blue color is preferred by most
Blue
consumers to create a cool, modern and /or
mystical atmosphere. Select this setting
according to your personal taste or mood.
Ambilight menu
Ambilight is an innovative lighting concept using light with fully adjustable
colors at the back of the TV to enhance the viewing experience. Analysis of the
picture content adapts the colors continuously, or the lights can be set to any
fixed color and many shades of white. Ambilight creates the ideal viewing
environment for your TV resulting in improved relaxed viewing, improved
perceived picture detail, contrast and color.
In standby mode the lights can be set/operated to any color and create a
unique ambiance in the room.
&
Select
Ambilight
in the TV menu.
é
Press the cursor right to enter the Ambilight menu.
"
Select Ambilight and press the cursor right to select
•
: will switch off the ambient lights and downlight all other menu items.
Off
•
: the ambient lights will be on. Refine the light settings in the menus
On
below.
'
Select
to adjust the light output of the ambient lights.
Brightness
(
Select
and press the cursor right to select
Mode
,
or
Relaxed
Movie
Action
•
: this will show constant light according to the settings in the
Color
Ambilight color menu. See below.
• The options
Ambience
match brightness and color to the screen content.
The mode selection made will effect the speed and/or saturation and/or
intensity which determines the viewing impression.
E.g. in
mode, the rate of brightness and color change is smoothly
Relaxed
and soft which gives you a more immersive yet relaxed viewing.
is the rate of brightness and color change as predefined in the
Ambience
factory.
will influence the perception of a movie whereas
Movie
influence the dynamic impression.
Notes:
- The rate of change is limited, as not to cause uncomfortable sensations.
- According to the selection made, some Ambilight menu items will be downlighted
and can not be selected.
§
In case
has been selected in the Mode menu:
Color
• Select
in the Ambilight menu and press the cursor right.
Color
• Select
and press the cursor right again to select
Auto Color
,
Warm white
Cool white
• Select
to select the general color of the light.
Palette
• Select
to adjust the colorfulness of the light.
Saturation
Note:
- Adjusting the Palette and/or Saturation settings will set the color mode to
Personal.
- The selected color mode will be the one used when turning on the ambient
lights from standby mode.
è
In case
,
Ambience
Relaxed
Mode menu:
• Select
in the Ambilight menu and press the cursor right.
Separation
• Select
for a mono behavior which means that all lamps will behave
Off
equally.
• Select
,
Minimum
Medium
effect over the available lamps.
!
Select
and use the cursor left/right to adjust and generate any
Balance
color and level of light intensity on the left and right side of the picture to
perfectly match your room setup.
Note: Infrared interference on external devices:
To avoid bad infrared remote control reception, place your external devices out of
sight of the ambient lights of your TV set.
Ambilight does not function well when the room temperature is less than 59°F/15°C.
Off
Color
.
,
,
and
Relaxed
Movie
Action
or
.
Blue
,
or
has been selected in the
Movie
Action
or
to define the Ambilight stereo
Maximum
or
.
On
,
,
Ambience
will dynamically
mode will
Action
,
Personal
23
Hide quick links:
Advertisement
Table of Contents
