Toyota COROLLA 2022 Quick Reference Manual page 43

DISABLING LDA SWAY WARNING ALERT
(1) Press " " switches and select "
(2) Press " " switches and select the "
hold " ." The setting screen is displayed.
(3) Press " " switches and select the "Vehicle sway warning function" and then
press or press and hold "
(4) Press " " to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
ADJUSTING SWAY ALERT SENSITIVITY
(1) Press " " switches and select "
(2) Press " " switches and select the "
hold " ." The setting screen is displayed.
(3) Press " " switches and select the "Vehicle sway warning sensitivity" and then
press or press and hold "
(4) Press " " to go back to the menu.
Refer to the Toyota Owner's Manual for additional information on LDA operation,
settings, adjustments, limitations, and precautions before attempting to use it.
Lane Tracing Assist (LTA)*
* Available only on vehicles with continuously variable transmission or hybrid system
When Full-Speed Range Dynamic Radar Cruise Control (DRCC)* is enabled and
lane markers are detectable, Lane Tracing Assist (LTA) uses the lines on the road
and/or preceding vehicles to help keep the vehicle centered in its lane.
* Not available on all models. See www.toyota.com/safety-sense for model
applicability.
Refer to the Toyota Owner's Manual for a list of additional situations in which the
system operation may be limited.
" from the Multi-Information Display (MID).
(LDA)" and then press or press and
" to select the desired setting.
" from the Multi-Information Display (MID).
(LDA)" and then press or press and
" to select the desired setting.
41