4.2.11.2 How to collect Log information in WebGUI
1. Enter the Diagnostic view.
2. Click "Save Logs", your log information will be collected. "Logs Location" will display the
location of the saving path.
Note:
this process may take several minutes to complete.
4.2.11.3 How to collect Log information in CLI
1. Execute the command "hptraidconf" to enter the CLI.
2. Execute the command "diag" in CLI, your log information will be collected.
If you have problems in use, please submit the log to our online service
(https://www.highpoint-tech.com/support-and-services).
23