STEP 3—ATTACH WEIGHT STACK TO UPRIGHT ASSEMBLY CONTINUED
h. Insert the hex screw through the lock washer, fl at washer, and selector pin attachment point and reattach it to the
Generation 1 top weight assembly using an allen wrench. Insert the hex screw through the lock washer, fl at washer,
and selector pin attachment and reattach it to the Generation 2 top weight assembly using an allen wrench.
i.
Using a degreaser and cloth, remove oil from the weight plates that was applied for anti corrosion during the
manufacturing process.
Generation
1
28
4
7
Generation
2
13
14
15
7
13
14
15
7