Philips 43BDL3650Q User Manual page 57

Table of Contents

Advertisement

WOL (Wake on LAN)
Allow the display to be turned on by a network message.
Note: This function only works in power mode 1 and mode 2.
Light sensor
Choose to turn on or off the light sensor function of CRD41.
Human sensor
Choose to turn on or off the human sensor function of
CRD41.
Configuration 1 reset
Reset all settings in Configuration 1 menu to factory preset
values.
Factory Reset
Reset all customized settings in Picture, Screen, Audio,
Configuration 1, Configuration 2 and Advanced Option to
the factory default values.
7.2.5. Configuration 2 menu
Picture
OSD turn off
Screen
OSD H position
Audio
OSD V position
Con�guration 1
System rotation
Con�guration 2
Information OSD
Advanced option
Logo
Monitor ID
Heat status
Monitor information
DP Version
HDMI Version
Con�guration2 reset
OSD turn off
Set the period of time the OSD (on-screen display) menu
stays on the screen.
The options are {Off, 5 - 120} seconds. {Off} does not
disappear automatically.
OSD H position
Adjust the horizontal position of the OSD menu.
OSD V position
Adjust the vertical position of the OSD menu.
Rotation
Change OSD and Android to Landscape / Portrait mode.
Note: Video inputs will not rotate with this setting.
Note: If Android APK plays video content, user MUST stop
and re-play to get correct video image.
Information OSD
Set the period of time the information OSD display on the
upper left corner of the screen. The information OSD will
display when input source and signal are changed.
The options are {Off, 1 - 60} seconds.
Logo
Choose to enable or disable the picture of Logo when
turning on your display.
{Off} – Both static Philips logo and Android boot
animation will not be shown.
Note: Logo will not be rotated even thought rotation setting
is set.
Monitor ID
Set the ID number for controlling the display via the RS232
connection. Each display must have a unique ID number
when multiple sets of the display are connected. Monitor ID
number range is between 1 and 255.
Heat Status
Current thermal status.
Monitor information
Shows information about your display, including model
45
name, SW version, serial number, and operation hours.
50
50
Landscape
10
On
Action
24.21°C 75.57°F
Action
1.1
1.4
Action
DP version
Change DP version. 1.1 or 1.2.
HDMI version
Set the HDMI version to 1.4 or 2.0.
Note: HDMI input source only.
Configuration 2 reset
Reset all settings in Configuration 2 menu to factory preset
values.
7.2.6. Advanced Option menu
IR control
Select the operation mode of the remote control when
multiple displays are connected via RS232 connection.
55
43BDL3650Q/50BDL3650Q/55BDL3650Q
{On} – Default value. Both Philips logo and Android boot
animation will be shown.
{User} – Static Philips logo will not be shown, only user-
selected boot animation will be shown in Android
settings.
{Monitor ID} set range in {1-255}. The default setting is 1.
{Monitor group} set range in {1-254}. The default setting
is 1.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
Picture
IR control
Screen
Power LED Light
Audio
Keyboard control
Con�guration 1
Tiling
Con�guration 2
Off Timer
Advanced option
Date and time
Schedule
HDMI with One Wire
HDMI One Wire Power off
Auto signal detection
Language
OSD transparency
Power Save
{Unlock} - All displays can be operated normally by the
remote control unit.
N/A
0
FBXX.XX
Unlock
On
Unlock
Action
Off
Action
Action
Off
Off
Off
English
Off
Mode 1

Advertisement

Table of Contents
loading

Table of Contents