Philips 43BDL3650Q User Manual page 49

is not present and boot on source is set to "Custom App",
system will launch custom App again.
Default is disabled.
6.4.2. Network Application
Settings -> Signage Display -> Network Application
Proxy
Settings -> Signage Display -> Network Application -> Proxy
Enable/disable network proxy by tapping "Enable" checkbox.
User can set up host IP and port number of the proxy server.
Default is disabled.
System supports the following proxy types: HTTP, HTTPS,
SOCKS4, and SOCKS5. Choose one for your proxy server.
If authorization with login name and password is required
for proxy serer, enable the checkbox for these items.
SICP Network Port
Settings -> Signage Display -> Network Application -> SICP
Network Port
Set up SICP default port and enable/disable network SICP.
Default SICP is enabled with port 5000.
Note:
Port number ranges from 1025 ~ 65535.
The following ports are occupied, they cannot be assigned to
SICP network port: 8000, 9988, 15220, 28123, 28124 and FTP
port (default 2121).
43BDL3650Q/50BDL3650Q/55BDL3650Q
6.4.3. System Tools
Settings -> Signage Display -> System Tools
Settings system features for signage display.
(1). Clear Storage
(2). Reset
(3). Auto restart
(4). Import & Export
(5). Clone
(6). Security
(7). Admin Password
Clear Storage
Settings -> Signage Display -> System Tools -> Clear Storage
Use to clear all data under {storage}/philips/ folder in
internal and external storage
(1). All:
Clear philips/ folder in internal storage, USB and SD card.
(2). Internal Storage
Clear philips/ folder in internal storage only.
(3). USB Storage
Clear philips/ folder in USB storage only.
(4). SD Card
Clear philips/ folder in SD card only.
The folders to be cleared will be listed. Press "RESET" to clear
all data under listed folder. Or press back key to leave and do
nothing.
Reset
Settings -> Signage Display -> System Tools -> Reset
47