VTech Drill & Learn Workbench Instruction Manual page 17

POWER TOOL ASSEMBLY INSTRUCTIONS
Circular Saw, Drill Press and Sander
Insert the Drill Press Top into
1.
the Drill Press Base. You will hear
the pieces snap into place when
properly inserted.
2. Insert the Circular Saw Top into
the Circular Saw Base. You will
hear the pieces snap into place
when properly inserted.
3. Insert the Sander Top into the
Sander Base. You will hear the
pieces snap i nto place when
properly inserted.
NOTE: The tool tops and bases cannot be disassembled after
assembly.
17
17
17