Kenwood KRC-929 Instruction Manual page 4

Band selector
Selects FM or AM
band. FM has three
positions and each
position can store 6
stations In memory.
The indicator switch-
es at the same time
as the band is chang-
ed.
*ABSS switch
(Automatic broadcasting
sensor system)
If this switch is kept on,
and the radio signal you
are receiving becomes
weak and reception dete-
riorates, seek operation !s
automatically started to
search for other strong
Signal stations.
Digital display/stereo
indicator
Displays the selected
frequency and _ lights
when a_ stereophonic
FM program is receiv-
ed.
Memory switch
Used to store the re-
ceived station in the
channel key. When
the switch is turned
on, the switch illumi-
nates for 5 seconds.
During this 5 second
interval, press the re-
quired channel key to
store the received sta-
tion frequency in the
channel key.
Preset scan switch
The station frequencies stored
in memory by channel keys
(1 — 6) are monitored in se-
quence for 5 seconds. Press
the preset scan switch once
again at the required station or
hold the channel key for con-
tinuous reception.
Channel keys (1 — 6)
These keys are used to store the
frequencies of selected radio
stations. Any 3 stations in FM
and 1 station in AM can be held
in memory.
Seek switch
By depressing the switch once,
the received frequency is varied
from lower to higher until a radio
signal is received. Then seek
operation stops and the unit is
tuned in to a station. To stop
manually, depress the switch
once again.
Up/down keys
When the up key is depressed,
the received frequency varies
from lower to higher; when the
down key is depressed the re-
ceived frequency varies from
higher to lower. A single depres-
sion of the key allows thé fre-
quency to vary one step ata
time. When the key is kept dep-
ressed the frequency changes
continuously.
KRC-929 3