Removal steps of the wireless WAN antenna assembly
Step
Screw (quantity)
3
M1.6 × L2.6 mm, flat-head, nylon-coated (4)
When installing: Ensure that the connector is attached firmly.
1090 Wireless WAN antenna cable guide rubber (for selected models)
For access, remove these FRUs:
• "1010 Base cover assembly" on page 56
• "1020 Built-in battery" on page 57
Torque
Color
Black
0.098 Nm
(1.0 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
65