Jabra Elite 75t Titanium Quick Start Manual

Jabra Elite 75t - Titanium Black
How do I pair my Jabra earbuds with my mobile device?
To pair with your smartphone, tablet, or mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold (1 second) the Left and
Right buttons.
The LEDs on both earbuds will flash green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LED on the right
earbud flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbuds to hear the
voice guided instructions.
Enter "0000" (four zeros) if you are asked for a pin code.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
To pair with your smartphone, tablet, or mobile device using only the
right earbud, follow these steps.
https://www.jabra.com/supportpages/jabra-elite-75t/100-99090000-20/faq/8ec1bcdc-
9b43-465e-b2c8-1faac22ef6f8
11/06/2022 23:36
Page 1 of 3