6: Setting The Speakers; Operating Instructions (This Booklet) - Sony PS-LX310BT Operating Instructions Manual

Stereo turntable system
Hide thumbs Also See for PS-LX310BT:
Table of Contents

Advertisement

6: Setting the Speakers

Setting the speaker impedance
Set the appropriate speaker impedance for
the speakers you are using.
1
Press AMP MENU.
The menu is displayed on the display
panel.
2
Press / to select "SP IMP.",
and then press
3
Press / to select the
appropriate speaker
impedance, and then press
.
"8 OHM": The default setting. Select
this when you connect all speakers
with a nominal impedance of 8 ohms
or higher.
"6 OHM": Select this when you
connect all speakers with a nominal
impedance of lower than 8 ohms.
Note
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a nominal impedance of 12 ohms
or higher.
• When you connect speakers to either SPEAKERS
A or B terminals, connect the speakers with a
nominal impedance of 8 ohms or 6 ohms.
Switching the speaker system
When two speaker systems are connected
to the receiver, you can select the speaker
system you want to operate.
Press SPEAKERS A/B repeatedly
to select the speaker system you
want to operate.
/ ,
Each time you press this button, the display
AMP MENU
changes cyclically.
"SPK A": Speakers connected to the
SPEAKERS A terminals.
"SPK B": Speakers connected to the
SPEAKERS B terminals.
"SPK A+B": Speakers connected to both
the SPEAKERS A and B terminals (parallel
connection).
.
"OFF SPEAKERS": "OFF" and "SPEAKERS"
appears alternately on the display panel.
No audio signals are output from any
speaker terminals.
Note
This setting is not available when headphones
are connected.
Tip
• The "SP A" or/and "SP B" indicators on the
display panel lights up to show which set of
terminals are selected. "SP A" and "SP B" light
off when the speaker system is turned off.
• You can also use SPEAKERS button on the
receiver to select the speaker system.
SPEAKERS A/B
19
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strdh190

Table of Contents