Adjusting Picture Settings - Samsung PE43H4000A Manual

Adjusting Picture Settings

Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
✎
NOTE
In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.
•
• Settings can be adjusted and stored for each external device connected to the TV.
• Lowering picture brightness reduces power consumption.
Picture Size
O
MENUm → Picture → Picture Size → ENTERE
Set the various picture options such as picture size and aspect ratio.
✎
The available items may differ depending on the selected mode.
✎ Depending on the input source, the picture size options may vary.
• Picture Size t: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we
highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎ Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
✎ Adjusts the Zoom or Position by using ▲, ▼ button.
4:3: Sets the picture to basic (4:3) mode.
✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the
screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i /
1080p) signals are inputted.
Zoom/Position: Adjust the picture size and position. It is only available in Zoom.
•
• Position: Adjust the picture position. It is only available in Screen Fit or Wide Zoom.
✎
NOTE
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to
•
centre the picture:
1. Select the Position. Press the ENTERE button.
2. Press the ▲, ▼, ◄ or ► button to move the picture.
• If you want to reset the position you adjusted, select Reset in the Position screen. The picture will be set to its
default position.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in
•
the overscan function.
4:3 Screen Size: Available only when picture size is set to Auto Wide. You can determine the desired picture
•
size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different
picture size.
[PH4000-RU]BN68-05792L-00L04.indb 19
English - 19
2014-02-03 7:22:00