Table of Contents
Advertisement
*
.
Setting
the Clock of the VTR
Before Requesting Service
Beare Requosiity Seve
Before requesting service, check the following points once again
VTR will not operate correctly
, Condensation may have
formed.
:
; Do not operate VTR for 1 hour.
SYMPTOM
CAUSE
REMEDY
CHECKED
VIR display is not
Mains lead is notconnected.
| Reconnect mains lead to VTR.
i
illuminated.
VTR display is
VTR is in timer mode.
Press TIMER REC to operate VTR manually.
illuminated butVTR_
>
=
i will not operate.
| Safety devices are operating. | Disconnect mains lead and wait for 1 minute.
Reconnect mains supply and check functions.
Playback will not operate correctly
CHECKED
|
SYMPTOM
CAUSE
REMEDY
icture noisy or not
Tracking is not correct.
| Adjust the tracking. See page 21.
in colour,
| Horizontal bars or
TV set is not tuned to VTR.
| Operate TEST SIGNAL on VTR and check TV
lines run down the
| tuning. See page 9.
worn.
35
Advertisement
Table of Contents
