Advertisement
Quick Links
SYLVANIA
Owner's
Manuam
Video
Cassette
Recorder
If you need
additional
operating
assistance
after
reading
this owner's
manual
or to order
replace-
ment
accessories,
please
call
TOLL FREE : 1-800-968-3429
or visit our web site at
http://www.SylvaniaConsu
met Electronics.corn
1. Before using your VCR
If channel
3 is already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into the VCR.
3) Press the PLAY button once.
• 4) After a few seconds, press the PLAY button on the VCR for 3 seconds.
• • The RF output channel will change to channel 4 from channel 3 and you
will see a playback picture.
• • When a picture does not appear on the TV screen, repeat step [4].
o he RF output channel may not
change when you adjust track-
ing during playback. In this case,
stop the playback, and start the
playbackagain. After that, press
the PLAY button on the VCR for
3 seconds again.
(Back
of VCR}
RF Cable (supplied)
Plug
the AC power
cords
of the VCR
and TV into the AC outlets.
Select this connection when you want to view or record a
Select this connection when you want to change channels
scrambled channel. With this connection, channels cannot
on the VCR. With this connection, you may watch one
be changed on the VCR. You can view or record ONLY the
channel while recording another.
channels you have selected on the cable box or the satellite
box.
• While you are recording, only the recorded channel
can be viewed.
To select channels of the cable box or satellite box
1) Turn on the VCR by pressing the POWER button, and
then, press the VCR/TV button.The POWER and the
VCR/TV indicators on the front panel will light on.
Then, press the CHANNEL buttons to select channel 3
or 4 (the same channel as the output channel of the
cable box or satellite box).
• If you use the channel 4, you need to change the
VCR's RF output to channel 4. Refer to "RF Output
Channel".
2) At the TV, select channel 3 or 4 (the same channel as
you have selected at step 1).
3) At the cable box or satellite box, select the channel you
want to view or record.
• You may not view or record a scrambled channel.
To select channels of the cable box
1) At the cable box, select channel 3 or 4 (the same
channel as the VCR's RF output channel.)
• Refer to "RF Output Channel".
2) At the TV, select the same channel as the output chan-
nel (3 or 4) of the cable box.
3) Turn on the VCR by pressing the POWER button, then
press the VCR/TV button. The POWER and VCR/TV
indicators on the front panel will light on. Then, select
the channel you want to view or record.
i To play back a tape
Follow the steps 1) to 2) above. Then, play back a tape.
• Refer to "Playback" on page 5.
To view one channel while recording another
1) While you are recording on the VCR, press the VCR/TV
button so that the VCR/TV indicator disappears on the
VCR.
2) At the cable box, select the channel you want to view.
You can use the AUDIO OUT jacks and
VIDEO OUT jack on the back of the
VCR if your TV has AudioNideo Input
jacks. In this case, you need to set the
TV to external Line Input Mode. Please
refer to your TV's owner's manual.
(Back of TV)
(Back of VCR)
AUDIO OUT jacks
AUDIO IN jacks
Connect the audio cables to the audio in
Connect
the audio cables from the audio
acks of a camcorder,
another VCR, a stereo
_
[_out
acks of a camcorder
another VCR
or
amplifier, or an audio system.
/
/an
audio source.
_mll
r_,}
4
_j_f_m
I
ANT IN jack
lll=q' I
i II
/NL
[};/
_£_Connect
your antenna or cabb box.
'_°_
_ _Connect
thJe RF cable (supplied)to
_the
antenna
input jack on your TV.
VIDEO
OUT jack
Connect
the video cable to the video in jack /
I
VIDEO IN lack
of a camcorder,
another VCR, or a TV.
I
Connect
th'e video cable from the video oul
jack of a camcorder
another VCR. or ar
8--
audio-visua
source (laser disc player,
video disc player, elc.L
• Remote control
(NA371UD /
NA375UD) with
Two AA batteries
• RF Cable
• Owner's Manual
(WPZ0901TM002)
(0VMN03901)
Printed in China
Install two AA batteries
(supplied) matching the
J_
"'/_--'b_
polarity indicated o
the bottom of the
remote control.
0VMN03901
/HF410UD,
HJ410UD
****
Advertisement
