Yaesu FT-767GX Operating Manual page 9

FUNC (T SET) (Orange Key)
This is the special key that activates
(with one push) the alternate functions of
all other keys. If this key is pressed
twice in succession, the subaudible tone
frequencies for the (optional) FTS-8 Tone
Squelch Unit can be selected by the
BAND/MCH keys.
MR (4)
The default function causes exit from the
VFO mode and recalis the last-used memory
channel (indicated to the right of the
operating frequency on the display). The
alternate function enters the digit 4 in
place of the blinking display digit selec-
ted for keypad frequency entry.
SPLIT (5)
When operating on a VFO, the default func-
tion causes the other VFO frequency to
become the transmitting frequency, while
the displayed VFO then serves as receive
frequency only. The alternate function
enters the digit 5 in place of the blin-
king display digit selected for frequency
entry.
VFO BaM (6)
The default function exchanges the memory
and mode of the selected VFO with the
memory and mode of the selected memory
channel. No data is overwritten. The
alternate function enters the digit 6 in
place of the blinking display digit selec-
ted for frequency entry.
H/G (ENT)
The default function toggles the selected
VFO between Ham bands and General Coverage
on HF. When General Coverage is selected
the green LED beneath the display window
is lit. The alternate (ENT) function
causes whatever digits have been selected
by the numeric keys and displayed (with
one digit blinking) to be entered into the
VFO, at which time operation shifts to the
new frequency and the functions of all
keypad keys return to their default
states. Once the orange FUNC key is pres-
sed, this key must be pressed to return
the display and keypad to normal (default)
operation.
AC (0)
The default function requires two presses
of this key in succession, and cancels
clarifier and/or split ofísets. The al-
ternate function enters the digit O in
place of the blinking display digit selec-
ted for frequency entry.
CLAR (1)
The default function toggles the clarifier
on and off, which causes the transmit fre-
quency to remain fixed while the tuning
knobs and buttons control only the recei-
ving frequency. Note that once a clarifier
offset is tuned, it is stored in a special
memory even when this key is used to turn
the clarifier off (only the 'AC! key
erases the clarifier memory). The alter-
nate function of this key enters the digit
1 in place of the blinking display digit
selected for frequency entry.
MCK (2)
The default (memory check) function allows
display of the contents of the memory
channels without disturbing operation.
When this key is pressed the MR indicator
at the left of the display and the CH
indicator at the right of the display both
blink. The contents of each memory chan-
nel can be checked by pressing the
BAND/MCH keys to step through the memo-
ries. Press this key again to return the
display to normal. The alternate function
enters the digit 2 in place of the blin-
king display digit selected for frequency
entry.
OFFSET (3)
When the clarifier or split operation is
active, the default function of this key
causes the difference between the transmit
and receive frequencies to be displayed
(with a preceeding !-' if the transmit
frequency is lower). Press this key again
to return the display to normal. The al-
ternate function enters the digit 3 in
place of the blinking display digit sel-
ected for frequency entry.