Shutting Down The Projector - ViewSonic PA700WC User Manual

Shutting Down the Projector

1. Press the Power button on the projector or remote control and a "power off
message" will appear.
NOTE: The projector cannot be turned off within one minute after starting.
2. Press the Power button again to confirm and shut down the projector.
NOTE: The cooling fans will continue to operate for about 10 seconds for the
cooling cycle and the Power Indicator Light will flash blue.
3. The Power Indicator Light will turn solid red and enter standby mode.
NOTE: If you wish to turn the projector back on, you must wait until the cooling
cycle has finished and the projector has entered standby mode. When
the projector is in standby mode, simply press the Power button again to
turn on the projector.
42