First Time Use - Matsui M120IR11E Instruction Manual

If there are no ironing instructions but you know the fabric, then use the table
above. The table is valid only for the actual material and does not account for any
finish applied to the fabric. Fabrics to which a finish has been applied (wrinkle
relief, printed T shirts, etc.) should be ironed at a lower temperature.
If the fabric contains mixed fibres, select the lowest ironing temperature of the
composition, e.g. iron a 60% polyester / 40% cotton mix at the temperature
indicated for polyester.
The iron heats up quicker than it cools down. Sort fabrics to be ironed into
groups according to temperature: wool with wool, cotton with cotton, etc. Start
by ironing articles requiring low temperature settings and progress to higher
ones.
Do not iron garments that are dirty or stained. The iron's heat may set the stain.
Pure (100%) wool fabrics may be pressed with the iron set to a steam position
and the garment protected by a dry cloth.

First Time Use

Inspect the iron carefully.
Check that the voltage marked on the rating matches your mains voltage.
Remove any protective film from the soleplate. Polish the soleplate lightly with a
clean soft cloth to remove any residues.
Maintaining the finish of the iron's soleplate is essential. Keep the soleplate
smooth: do not scratch it on metal objects (e.g. the edge of the ironing board,
buttons, zippers, etc.) as these may impair performance.
GB
23