DeLonghi TCH8093ERBCA Instructions For Use Manual page 14

DESCRIPTION
(see fig. 1)
A
ON/OFF button
B
+/- adjustment buttons
C
MODE button (selects the operating mode)
D
"ECO plus" button
E
Timer button
F
Swivel button
G
Remote control receiver
H Indicator light
I
Air intake grille
J
Filter
USE
Installation
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit.
Avoid using the same outlet for other appliances.
Electrical connection
Before plugging the appliance into the outlet, check that
the outlet power corresponds to the value indicated on the
rating plate and that the outlet power is adequate for the
load.
Fig. A
Fig. C
Mounting the base
- Fit the two parts of the base together, matching the
guide pins on the front with the recesses on the back
and snapping the two clips into place (fig. A and fig. B).
- Turn the appliance upside down and position the
assembled base on the appliance in order to couple
the two openings with the two tabs on the appliance,
tilting it as shown in figure C, consequently turn
the base down till the two frontal teeth snaps into
position (figure D).
- Assembly time: approx. 5 minutes.
- Optional
- Fasten the tower to the base using the screw
provided to achieve extra stability.
- Tools needed and estimated time:
1 Phillips head screwdriver type PH 2 x 100
1 screws (included)
Assembly time: approx. 2 minutes.
Operation and use
- Plug into the outlet.
- The appliance emits a beep. The indicator light (H)
comes on and remains lit while the appliance is
powered.
- Press the ON/OFF button (A) to turn the appliance on.
Fig. B
Optional screw
14
Fig. D