Write And Send An E-Mail - Philips 355 Manual

An e-mail account might be preconfigured with the
name of your operator. In this case, its name cannot be
changed.
,
1. Press , select
Messages
Settings > Account name
2. Enter the new name in the edition window that
,
appears and press
Advanced
The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn't have to change any of them.
If the fields of these menus are empty, or if you
encounter connection problems, contact your ISP.
POP3: allows you to enter the POP3 port
Port
number, which is used to receive e-mails.
SMTP: allows you to enter the SMTP port
Port
number, which is used to send e-mails.
address: allows you to enter the DNS address of
DNS
the external data network you want to connect to.
authenticat.: allows you to activate/deactivate
SMPT
the authentication process with the SMTP server.
In most European countries, this menu should be set to
Off: your e-mails will NOT be sent if set to On.
Contact your provider for complete information.
48
> >
E-mail E-mail 1
,
and press .
.

Write and send an e-mail

The
e-mails to one or several recipients at a
Send mail
time, including with an attachment
>
such as a jpeg picture. Once received, your messages
can be forwarded and the attachments visualised with
the appropriate software.
To one or several recipients
,
1. Press , select
or
E-mail 2
use. Select
Send mail
-
2. Move to select
access the list.
If you select the phonebook «On SIM card», you will
not be able to access any e-mail address, but an edit
window will allow you to enter one. See "Contacts"
page 22 for information on phonebook selection.
3. Select a name in the list and press
to your mailing list or press
go back to the previous sub-menu.
4. Back to the
the e-mail address or to
or select
Add
phonebook again and add new names to the
mailing list.
menu allows you to send
Send mail
> E-mail, then
Messages
depending on the one you wish to
,
and press .
and press
Add addressee
c
to cancel and
,
list, press
Addressees
it from the list,
Remove
,
addressee, press
E-mail 1
,
to
,
to add it
to
Change
to access the
Messages