Philips 355 Manual page 10

1. Once the battery and battery cover are clipped
on the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
LEFT hand socket at the base of the phone on
one end, then plug it into a main AC power
socket with easy access on the other end.
2. The battery symbol indicates the state of charge:
• During charging the 4 charge indicators change;
Each bar represents around 25% of charge and it
Getting started
takes around 1.45 hours to fully recharge your
mobile phone.
• When all 4 bars are steady the battery is fully
charged, you can disconnect the charger.
• Depending on the network and condition of use,
talk time can be up to 4 hrs and stand-by time
up to 320 hrs.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn't damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
3. If you don't intend to use your phone for several
days, we recommend you disconnect the battery.
You can use the phone while it is on charge (note that
the vibra alert goes Off when plugging the charger). If
the battery is completely flat, the battery icon will only
reappear after up to 5 minutes of charging.
3