Quick Start Instructions; Unpacking And Inspecting The Base Station; Installation Procedures - PSC PSRF-1000 System Manual

Quick Start Instructions

Unpacking and
Inspecting the
Base Station
Installation
Procedures
6
After unpacking your new Base Station, check the contents of the ship-
ping carton to ensure all the items you ordered are included:
™
• PowerScan
• Interface Cable
• Power Supply (AC Adapter or Forklift DC Converter)
• Systems Manual (this manual)
• Programming Guide
• Optional Accessories that you ordered. (The Base Station can
be purchased with or without accessory kits.)
If your package contains wrong or missing components, contact your
place of purchase. If there are damaged components, immediately file a
claim with the carrier. You may want to save your packing material in
case you need to ship the scanner at some later time.
Other manuals for this product are available on our
internet website. See the back cover for our internet
address.
NOTE
The basic steps below must be performed to set up the RF scanner.
Each of these steps is detailed in this section.
Installing the Battery
•
• Verifying Scanner Operation
• Connecting the Base Station to the Host Terminal
• Linking the Scanner to a Base Station
• Verifying Scanner-to-Base Station Communications
• Using the PowerScan RF System
Scanner Base Station
PowerScan ™ RF Scanner