Table of Contents
Advertisement
(3) MODULATION BY LFO
guitar.
°
FREQUENCY
HIGH
CUTOFF
FREQUENCY
AT A
ENV.
LFO
LOW,
pncure
ePEDAL CONT
(4) CONTROL BY PEDAL
The VCF can be controlled by pedal to achieve the same effects as when it is controlled manually.
SETTING
Connect the Roland Foot Volume FV-2 to the VCF PEDAL CONT Jack on the rear panel.
VCF
PEDALCONT
PITCH.
EXT IN
OUTPUT JACK
Set the switch to PEDAL CONT and set the slide lever to the desired
position.
The maximum
cutoff frequency level controlled by pedal will be de-
termined by the slide lever.
Cue CONT
The VCF Cutoff Frequency Control and FV-2 Minimum
Level may be
set to any position.
The,minimum
cutoff frequency
level controlled by pedal may be de-
termined by these controls.
+
——
EEEN
——
USING REMOTE
The LFO modulation of the VCF can be turned
on and off by the Remote ON/OFF Selector
Switch located on the guitar.
This switch may also be used to activate other
effects such as the chorus, vibrato, or reverb on
external
synthesizers,
amplifiers
or
effect
devices.
To
accomplish
this,
simply
patch
between the Remote Jack on the rear panel of
the
GR-500,
and
the
desired
remote
jack
{or the footswitch jack) of the external equip-
ment or device.
REMOTE:
E!
OFF
GUITAR
INTHESIZER
DUAL
F
PORTAMENTO
Advertisement
Table of Contents
