Control Panel; Blade Guard - Husqvarna K 1 PACE Workshop Manual

6. Install in the opposite sequence.

8.5 Control panel

8.5.1 To remove and install the control panel
1. Remove the left handle half. Refer to
overview on page 15 .
2. Remove the power trigger. Refer to
and install the power trigger and the power trigger
lockout on page 26 .
3. Remove the connector from the wiring assembly.
4. Pull out the locking clips and remove the control
panel.
5. Install in the opposite sequence.
1597 - 003 - 05.07.2023

8.6 Blade guard

8.6.1 To disassemble and assemble the blade
guard
1. Remove the hose from the water valve.
Product
To remove
2. Remove the cutting blade from the blade guard.
Repair instructions - 27