Table of Contents
Advertisement
2669.3.qxd
15-10-2007
† Press
.
OK
º Press the green key to enter the Edit mode.
The selected list brings up a full channel list.
◊Press navigation key up or down to highlight a
channel.
‹ Press
OK
to mark (or unmark) the highlighted
channel.
The channel is added to (or removed from) the
selected list.
≈Press the green key again to leave the Edit
mode.
The modified channel list appears again.
5.5.3
Select a channel from a favourite list
‡ Press
.
OK
The last selected channel list appears.
® Use navigation key up or down to highlight a
channel.
Ò Press
.
OK
The TV tunes to that channel.
à Tip
• Use
to go through the TV channels of the
-P+
®
selected favourite list.
• With the number keys you can still select
®
channels which are not marked as favourite.
®
MENU
+
-
1
2
4
5
7
8
AV
0
5.6
Timers and locks
This section describes how to switch the TV on or
off at a specified time and to lock or unlock the TV.
5.6.1
Automatically switch to standby
Sleeptimer switches the TV to standby after a time.
‡ Press Menu on the remote control and select
TV menu > Features > Sleeptimer and press
navigation key right to enter the sleeptimer bar.
® Press navigation key up or down to set the time
up to 180 minutes in steps of 5 minutes. If set
to 0 minutes, the Sleeptimer is switched off.
You can always switch off your TV earlier or reset
the time during countdown.
18
10:26
Pagina 18
®
+
+
-
3
-
6
-
0
9
9
5.6.2
Automatically switch the TV on
Not applicable in case of no Teletext present.
On timer switches the TV on automatically to a
specified channel at a specified time, from standby.
‡ Press Menu on the remote control and select
TV menu > Features > On timer and press
navigation key right to enter the On timer
menu.
® Use navigation key up or down, left or right to
select and enter the menu items one by one to
set a channel, a day of the week or daily, and a
starting time.
Ò Press
OK
to confirm.
† Press Menu to quit the menu.
à Tip
To switch off the On timer, select Off in the On
timer menu.
5.6.3
Lock TV channels and programmes
Lock TV channels and/or programmes from
connected devices to prevent children from
watching them. Lock and unlock with a four number
code.
Set or change your code
‡ Press Menu on the remote control and select
TV menu > Features > Set or Change code
and press navigation key right to enter your
code.
® Enter your code with the number keys.
The Features menu reappears with a message
confirming that your code has been created or
changed.
Did you forget your code ?
‡ Select Change code.
® Press navigation key right.
Ò Enter the overriding code 8-8-8-8.
† Enter a new personal code.
º Confirm your new entered code.
The previous code is erased and the new code
is stored.
Use more of your TV
Advertisement
Table of Contents
