ASROCK H310CM-HDV/M.2 SE User Manual page 58

Realtime Memory Timing
Configure the realtime memory timings.
[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Configuration
Vcore Offset Voltage
Use this to configure Vcore Offset Voltage. The default value is [Auto].
GT Offset Voltage
Use this to configure GT Offset Voltage. The default value is [Auto].
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
PCH +1.0 Voltage
Configure the chipset voltage (1.0V).
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
Save current UEFI settings as an user default profile to disk.
Load User UEFI Setup Profile to Disk
Load previously saved user defaults from the disk.
54