Advertisement
PS-LX430/430€/431/431N/433
3-2.
ELECTRICAL
ADJUSTMENT
Stylus Drop-point Adjustment
Speed Adjustment
Note: Stylus force adjustment should be completed.
1. Put a test record YFSC-16 on the mat.
2. Set the SPEED switch to 33%
3. Press the START/STOP button.
Note: Be sure to perform 45rpm adjustment before 33rpm.
1. Put a stroboscope board on the mat.
2. Set the SPEED switch to 45.
Press the START/STOP button.
Adjust
RV102
so
that
the stripped
pattern
stroboscope board is stationary.
Set the SPEED switch to 33.
Adjust RV101 in the same way.
4. By using a screwdriver, turn the adjustment screw
so that the stylus tip drops on the record at the
4—16 counts position.
Note: The
proper
adjustment
for a 30cm
record
is also
correct for a 17cm record.
adjustment
screw
RV102
(45 rpm)
Advertisement
