Download Print this page

Sony PS-LX430 Service Manual page 15

Hide thumbs Also See for PS-LX430:

Advertisement

PS-LX430/430€/431/431N/433
Stylus Height Adjustment
Note: Perform
both adjustment for manual and automatic
operations.
1. Automatic
1) Put a test record on the mat.
2) Depress
the lifter lever to make
a lifterdown
mode.
3) Move
the tonearm
to out of groove
at record
by hand.
4) Rotate
the
turntable
by hand
and
at make
tonearm lead-in.
5) Move
the tonearm
to out of groove of record
by hand again.
6) Rotate
the turntable
by hand
and make
the
tonearm.
7) Then,
loosen
the
adjustment
screw
(A) and
adjust the height of the tonearm lifter so that
the stylus height becomes in 4 — 8mm.
8) Rotate the turntable by hand slowly and move
the
tonearm
to
the
most
outer
groove
of
record.
9) Confirm that stylus height becomes in 4—8mm.
2. Manual
1) Put a test record on the mat.
2) Move
the tonearm
to out of groove of record
by hand.
3) Rotate
the turntable
by hand
and make
the
tonearm lead-in.
4) Raise the lifter lever to make a lifter-up mode.
5) Move
the tonearm
until most outer groove of
record by hand.
6) Adjust
the adjustment
screw
(B) so that the
stylus height becomes in 4—8mm.
7) Move
the
tonearm
to
the
out
of groove
of
record by hand.
Confirm that stylus height becomes in 4—8mm.
8) Rotate
the turntable
by hand and return the
tonearm to arm rest.
9) After the adjustment, lock the portion @ with
suitable locking compound.
Note:
@
Stylus height difference should be within 2mm,
between automatic and manual operation.
When the arm returns.
®
The tonearm
should be not contact with the
top part of the rest when the tonearm returns.
—17-
adjustment screw (A)
adjustment screw (B)

Advertisement

loading

This manual is also suitable for:

Ps-lx430cPs-lx431Ps-lx431nPs-lx433