Pioneer PD-F906 Service Manual page 47

PD-F906
THE FOLLOWING ITEMS.
qa) Assemble the arm plate as shown below, watching out
for the drive plate hook.
Drive Plate
Place Arm (A) and the Arm A spring? on the loading
base, being careful to keep them in the position shown
Set the drive plate and arm plate, which were assem-
bled in Step , on the Arm (A) side as shown below.
At this time be careful to keep Arm (A) in the posi-
tion described in Step @.
Insert the gear plate boss into the drive plate groove
and pull it toward you.
Drive Plate Gear Plate Boss
ie
al
lilt ir,
(8) Tum gear pulley (B) and position Arm (A) as shown
below.
®
Note : Do not hold the tip (blade) of arm (A) during
operation.
47